Fuselage Page 4
|
|
||
 |
I riveted the tail cone skin to the bulkheads OFF of the fuse jig. It was much easier to get in there to do it. The assembly went on the jig with no problems when I was done... | |
 |
I decided to rivet stiffeners to the bottom skins aft of the baggage area to prevent any oil canning... I used .032 angle... |
 |
 |
I riveted what I could on the tail bottom skins. I need to do some work to my step before I can rivet it on... I can still rivet the right side tail skin on though. Maybe tomorrow... |
 |
 |
I mounted my strobe power supply on one of the floor ribs. Fits in there perfectly... You can see more info on this power supply HERE. | |
 |
I now have all the tail skins riveted on. |
 |
 |
It is starting to come together. |
 |
 |
I managed to get the left F-823 skin riveted on last night. |
 |
 |
I still need to rivet the F-805 and F-806 bulkheads in though. |
 |
 |
More pictures... |
|
