Finish Kit Page 11
 |
Since I have a Garmin Pilot III in the front now I decided to mount my Magellan in the back for the PAX... I used the holder part RAM mount I had originally bought and an ADEL clamp to mount it to the front seat back weldment... |
 |
 |
I used the rest of the RAM mount to install a chart board... I used countersunk screws and lock nuts to attach it to the board... |
 |
 |
And then I simply used one of the panel mount screws to attach the other end to the panel... The board will stow away under the panel when not in use... |
 |
 |
In these pictures you can also see how the stick is cut down to miss the bottom of the panel... |
 |
 |
Here is the mirror I bought at Part America... I made a curved round piece of AL and drilled a hole in the middle for the suction cup mount to come through... |
 |
 |
Then I drill two holes on the top and bottom of the AL pop rivets, then match drilled it to the roll over bar... |
 |
 |
The mirror will swivel all round so the visibility is great, and it doesn't get in the way of the canopy... | |
 |
I installed some rudder return springs... This really helps during taxi to keep from over controlling, and it also helps some to dampen the tail wag in turbulence... I am even thinking of getting some stronger ones... |
 |
 |
One pound Halon Fire Extinguisher... | |